Detailing Clay Bar 200g - SOFT (BLUE)

Detailing Clay Bar — 200 g (Soft • Medium • Heavy)

D-TAIL LAB Detailing Clay Bars lift bonded contamination that washing can’t touch — traffic film, bugs, resin, light overspray, iron residues — leaving paint smooth and ready for polishing or protection. Available in three grades (Soft, Medium, Heavy) to match the job and paint type.

Why You'll Love It

• Real decon results — rapidly removes embedded grit for a glassy finish before correction/protection.
• 3 grades, one workflow — start Soft on sensitive paint; step up to Medium/Heavy where needed.
• Easy to handle — 200 g bar with good elasticity; stores in its protective box for reuse.
• Versatile surfaces — safe for painted and chrome surfaces when properly lubricated.

Pairs Well With

• Iron remover (chemical decon first): PURGE — pH-Neutral Iron & Fallout Remover
• Clay lubricant / final gloss: GLAM — Quick Wax Detailer
• Wash solution (pre/post): FOMO — pH-Neutral Car Shampoo
• Synthetic alternative for maintenance: Synthetic Clay Towel 3.0

How To Use

1. Pre-wash & wash: Rinse, then contact-wash with FOMO; rinse thoroughly.
2. Chemical decon (recommended): Spray PURGE on cool panels, allow reaction, then rinse.
3. Lubricate: Mist a small section generously with GLAM.
4. Clay: Flatten a piece of clay. Glide with light pressure in straight lines until the surface feels smooth. Fold to a clean face as it loads.
5. Wipe & inspect: Buff residue with a clean microfiber and check under proper lighting.
6. Protect: Optionally re-wash, then apply your chosen protection (sealant/coating/wax).

Notes: Always test on an inconspicuous spot. Use the least aggressive grade that achieves the goal. Do not clay on dry paint or under direct sun/hot panels.