FLASH Adhesive Remover - 20L

FLASH — Adhesive Remover

FLASH is D-TAIL LAB’s lightning-fast adhesive remover designed to break down sticky residues from decals, badges, tapes, labels, and more — while also pulling double duty for many degreasing tasks in the shop.

What FLASH Does

Dissolves stubborn glue and gummy residues so they wipe away with minimal effort, helping you restore a clean, uniform surface without heavy abrasion. Also effective as a spot-degreaser on oils and tar. 

Why You Need FLASH

• Lightning-fast action on sticker/adhesive residue.
• Versatile — useful for various degreasing applications around the vehicle. 
• Time saver — reduces aggressive scrubbing versus general cleaners.

Where to Use It

• Automotive paint (clear-coated) — badge/decal/tape residue (always spot test)
• Glass and metal trim
• Most exterior plastics and painted plastics (spot test; avoid raw/porous plastics)

Directions

1. Work on a cool, clean, shaded surface. Wash off loose dirt first.
2. Shake well. Spray a small amount onto a microfiber or directly onto the residue.
3. Allow a brief dwell while monitoring. Do not let the product dry.
4. Gently agitate with a soft microfiber or plastic razor (if needed), then wipe away.
5. Rinse or wash the area with a pH-neutral shampoo and dry. Repeat light passes only if required.

Pro Tip: For thick adhesive pads, warm the area slightly (safe heat) and remove bulk material first, then use FLASH to clean the remaining glue. Always start with the least aggressive method.

Compatibility & Precautions

• Always spot test in an inconspicuous area — especially on matte/satin finishes, raw plastics, and fresh resprays.
• Avoid hot panels and direct sun. Remove overspray from rubber and glass promptly.
• Wear gloves; ensure adequate ventilation. Keep away from ignition sources.

Pairs Well With

• Edgeless 420 GSM Microfiber Towels — safe wipe-off without marring.